|
BUSINESS PRINTING TECHNOLOGIES REPORT
TIME TO TOSS YOUR LEGACY FORMS COMPOSITION? By Heidi Tolliver-Nigro For forms manufacturers, the choice of composition software is a make-it-or-break-it part of the business. In an industry as competitive as forms manufacturing, where just maintaining margins (let alone growing them) is a daily challenge, every minute spent on non-billable work eats away at the bottom line. With forms manufacturers no longer able to charge for composition services, choosing software that will enable you to create forms as quickly and efficiently as possible can have an enormous impact on the profitability of the job. The irony is that you wouldn’t know it by the high percentage of manufacturers who are hanging onto old legacy software, like Bloc Development's F3, from the 1980s and 1990s. The argument usually goes like this: "I'm losing money on this area of my business anyway. How can I justify purchasing a $5,000 software program?" While many manufacturers are hesitant to make an investment in a non-chargeable area of their business, they are unwittingly eroding their own profitability every day that they do not make this investment. There are two reasons for this: 1. Inefficiency translates into hard dollars.
Although these features are still enormously valuable, when Bloc Development went out of business, it left its users with no support. As operating systems evolved and production workflows became more sophisticated, forms manufacturers have found it increasingly difficult to keep these systems afloat. This has led to untold amounts of time spent trying to create workarounds and patches just to keep their solutions running, and every upgrade leaves them wondering if this will finally be their demise.
In fact, this oversight—which occurs in all areas of production, not just forms manufacturing—has been the Achilles heel of the industry for years. As a general rule, manufacturers have always had a very poor idea of their true costs, so they underestimate how much their inefficiency is really costing them. They look at hard costs like labor, consumables, and presstime, and overlook "soft" costs like the endless, unnecessary hours spent fighting with legacy systems. As a result, they can be much less profitable than they realize. Another productivity-killer is the inability of these systems to integrate
into new, highly efficient workflows like CIP4 and JDF (Job Definition Format).
Part of the Computer Integrated Manufacturing model, these workflows allow
printers to create highly automated production lines that allow them to queue,
print, and even finish jobs with minimal or no human intervention. These
workflows use electronic tags, called "job tickets," that travel with the file
to do automated functions like presetting ink keys on presses, presetting
bindery equipment, and monitoring and maintaining color standards through
color-sensing equipment inline or offline with the press. In an industry in which manufacturers cannot raise prices to improve profitability, even incremental improvements to internal productivity can have strong benefits to the bottom line, especially in short-run operations. This makes the ability to migrate forms production to CIM workflows an important long-term goal. Manufacturers with legacy forms composition systems, however, cannot take advantage of these efficiencies. These inefficiencies are not limited to users of legacy systems. Many users of traditional desktop publishing software, such as QuarkXpress, Adobe PageMaker, and Illustrator, are also struggling with the inefficiencies of forms composition. Although this software is easily upgradeable and compatible with the latest digital CIM workflows, the process of forms composition itself can be time-consuming and inefficient, since everything has to be done by hand. Just do the math. If it takes designers two hours to create a form that could be completed in only 15 minutes using forms-specific software, that's 1 hour and 45 minutes of non-productive time that comes right out of the bottom line. Multiply that by the number of forms you design in a week or a month, and suddenly, you find that you could quickly reclaim entire days from your production cycle.
Certainly, manufacturers sorely need additional sources of revenue. It is
unlikely that anyone would argue that paper forms are under severe pressure from
electronic alternatives. While few people believe that the forms industry will
entirely go away, certainly, the number of manufacturers needed to support it
will continue to decline. There are two ways to combat this decline. Manufacturers can make themselves indispensable or they can begin offering the services that most threaten them — e-forms, Internet forms, and PDF forms. How do you make yourself indispensable? By changing the way your customers create forms. A huge part of a forms manufacturer's business is called "change repeats." From run to run, the job is 99% the same, but there might be a small change, such as a name or phone number. By using Internet browser-based software, manufacturers can now set up Web sites for each of their customers, enabling them to create forms online using templates, or modifying existing forms. Once the document is created, customers simply log in, personalize the document, make any desired changes, pick the paper stock, set the quantities, and press "order." Web-based systems also allow large companies to decentralize the process of creating or modifying forms to meet their ever-changing and widely decentralized needs. Because employees from local departments to regional branches can log in and make changes, these systems can be set up to facilitate a corporate approval process before going live. For the customer, Web-based forms composition simplifies the process of change repeats and saves them time. For manufacturers, it locks customers into a long-term relationship that is difficult to break. Both Amgraph's OneForm Designer and Digicomp's FormsX Enterprise Server offer this functionality. Then there is the issue of e-forms. Although e-forms are often competitive with traditional paper-based forms, it is because these forms are competitive that smart manufacturers and distributors should consider offering this service. Dr. Joseph Webb, a commentator to the commercial printing industry, is famous for his phrase, "Invest in the technology that can put you out of business." It is a fact that electronic forms are a serious threat to the paper-based forms industry. Those who can capture that revenue by producing both paper and e-forms are not only increasing their revenue streams, but protecting themselves from customer attrition for the long-term.
1. Standalone systems, like Amgraph's Mecca or OneForm Designer. Mecca and OneForm Designer operate as standalone forms composition software. To some extent, Mecca can also convert legacy F3 files. Mecca is a UNIX-based composition software for the creation of paper-based
business forms, labels, and security documents, largely in the high-volume
environment. It is optimized for print production to both digital and
conventional presses, with special attention to print requirements like the
ability to do up to 32 separations and handle complex document security. The
software includes interactive tools for custom design and batch composition
capabilities for merging variable data and pre-designed templates. 2. Quark or InDesign extensions, like Digicomp's FormsX, serve as
standalone composition systems and offer both F3 and Mecca conversions into
QuarkXPress files. 3. Digicomp also offers e-FormsX, which allows users to create Internet form fields and PDF electronic forms, as well as SecureX for creating security documents.
Particularly for F3 users, making the transition now is critically important. With each subsequent release of Windows OS, workarounds become more and more difficult (many users are reporting that they can no longer get it to work at all), and with every passing day, productivity losses are a drag on your bottom line. Fortunately for manufacturers, today's forms composition software, whether for paper-based, Internet-, or e-forms, can shorten the time-consuming process dramatically. When you're producing hundreds, or even thousands, of forms per month, all you have to do is a little math to see that a small investment can go a long way. Heidi Tolliver-Nigro is an industry analyst and writer specializing in digital and variable data printing technologies. She is the former editor of Printing News, a consultant and writer for TrendWatch Graphic Arts. She can be reached at <mailto:htollvr@aol.com> htollvr@aol.com.
WHAT'S NEW AT DMIA? Excess Inventory Depot DMIA's Excess Inventory Depot enables members to sell items such as excess inventories, blank forms and labels, pre-converted material, paper stock, converted material, new or used equipment and other business-related items. Take advantage of this introductory offer and post your items for free. Find out what's for sale. DMIA members can view postings 24/7 at no charge. Click here: <http://sourcehotline.dmia.org/Source_Sale_Links.htm>
CHECK OUT THE SOURCE HOTLINE ON THE WEB You can search the DMIA Source Hotline Database through this state-of-the-art program featuring a comprehensive database of more than 30,000 suppliers organized by product category and region. With a few clicks, you can sort the capabilities of these manufacturing sources, identify your top five, and automatically send quotation requests via e-mail. It’s a fast, comprehensive and efficient way to develop and manage product quotations. Built upon DMIA’s Source Hotline Database, this web-based service will save you valuable time and allow you to search for sources 24-hours a day, 7 days a week! Start using this great member benefit today and see how it can help you make more sales, faster! Just go to <http://www.dmia.org> www.dmia.org and click on "Source Hotline Database" to enter the Online Sourcing Service. There is a tutorial that will help guide you through the system and then you'll be off and running! The first time you use the service, you’ll need to enter your Login Name and a special password. (This is different from your regular DMIA password.) If you need your login and password, call the hotline at 800-333-2828. Enjoy this new service from DMIA and remember that we are always working to bring you new products and services that really make a difference for your business! _______________________________________________________________________________________
EDITORIAL STAFF: <mailto:htollvr@aol.com> Heidi
Tolliver-Nigro <mailto:jdoran@dmia.org> Jennie
Doran Submit articles, questions, or letters to: ©Copyright 2005 by DMIA. All rights reserved. Published in the United States
of America. This publication may not be reproduced, stored in a retrieval
system, or transmitted in whole, or in part, in any form or by any means,
electronic, mechanical, photocopied, recorded, or otherwise, without the prior
permission of DMIA, 433 E. Monroe Ave., Alexandria, VA 22301-1693. ISSN 1552-3675 For information about advertising in the BPTR, <mailto:ckelly@dmia.org?subject=Interested_in_BPTR_Advertising> click here to reach Cyndy Kelly at DMIA. |